Surface
*Operating Efficiency
*Safe and fast rod handling
*Drill in any direction.
*Automatic synchronisation, hydraulic rod making and breaking.
*Lower Maintenance Costs
*Less Energy and Fuel Consumption
*Reliability, Durability and Safety!
*Compact and Innovative Design
SMART CHOICE!
RX-5 is fully hydraulic diamond core drilling rig, designed for surface research drillings.
It is the perfect combination of the proven RX concept, combined with new and powerful components.
The RX-5 uses well proven technology for diamond core drills combined with new improvements in order
to get easy drill operation. Hydraulic jacks, mast dump, hinged top mast and all controls available at the control
panel provide the driller an easy set-up. Other features such as the strong main winch, powerful direct feed
cylinder, advanced diesel engine, foldable mast and Gas Spring Rod Holder.
RX-5 Coring Rig rotation speed, power and rotation unit aperture diameter is designed to give optimal
performance in 60-122.6 mm (B-P) diameter wireline or conventional drilling.
RX-5, drilling unit, power unit, wireline unit (automatic winding system), main winch control of the mixer
and mud pump are performed from the operator panel.
The gauge located on the operator panel displays, drilling rig advancement position;
– Hold back force,
– Feed force,
– Rotation speed,
It can observe the data and is able to control diesel engine.
RX-5, can be mounted on 3 different chassis.
– Skid frame
– Wheel frame
– Crawler frame
RX-5 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings
can be done.
RX-5 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage
and big time save
Drilling Depth Capacity
These figures serve as guidelines only. They are calculated with available pull/feed force, weight of drill string in water filled hole, average WOB and reserve for breaking solid core in rock with 5MPa Tensile Strength. Son-Mak cannot guarantee these capacities will be reached in all working conditions due to varying factors such ITH used, conditions of the ground and differences in operation
Fluid Filled | ||
Drill Rod | Metric | U.S. System |
BO / BRO Wireline | 1550 m | 5085 ft |
NO / NRO Wireline | 1200 m | 3937 ft |
NRO Thin Wall | 1410 m | 4625 ft |
HO / HRO Wireline | 800 m | 2624 ft |
HRO Thin Wall | 940 m | 3083 ft |
PHD / PO Wireline | 500 m | 1640 ft |
PHD Thin Wall | 665 m | 2181 ft |
Rotation Unit | |
Rod sizes: | B-P |
Power: | Hydraulic Motor |
Transmission: | Funk 4 speed |
Final Drive: | Straight cut gears |
Ratio: | 2.42:1 |
Rotation Unit Opener: | Side shift type – manuel actuated |
Hydraulic P Chuck | Hydraulic Open, Spring Closed |
Spindle inner diameter: | 117 mm (4-5/8 in) |
Chuck axial holding force: | 181 kN (40 690 lb) |
Torque and RPM Ratings | Speed | Torque | ||
Spindle Speeds | Ratio | RPM | Nm | lbft |
1st Gear | 6.63:1 | 117-196 | 5113-3051 | 3771-2250 |
2nd Gear | 3.17:1 | 246-410 | 2445-1459 | 1803-1076 |
3rd Gear | 1.72:1 | 451-756 | 1326-792 | 978-584 |
4th Gear | 1.00:1 | 776-1300 | 771-460 | 569-340 |
System Power Unit | ||
Cummins QSB 6.7 L, turbo charged, | Metric | U.S. System |
Volume: | 6.7 liter | 1.77 gallons |
Power: | 164 kW | 220 bhp |
RPM: | 1800 | 1800 |
Electrical System: | 12V | 12V |
Cooling System: | Water | |
Emmissions Certifications: | Stage III | Tier 3 |
Hydraulic System | Metric | U.S. System |
Primary Pump: | 250 l/min – 280 bar | 66 gal/min – 4061 psi |
Secondary Pump: | 127 l/min – 200 bar | 33 gal/min – 2900 psi |
Auxiliary Pump: | 50 l/min – 200 bar | 13 gal/min – 2900 psi |
Hydraulic Oil Cooling: | Air | |
Mast and Feed System | Metric | U.S. System |
Feed Stroke: | 3.50 m | 11 ft |
Thrust Force: | 60 kN | 13480 lb |
Pull Force: | 138 kN | 31000 lb |
Mast Dump Travel: | 1.20 m | 3.9 ft |
Drilling Angle: | 45 to 90 degrees | 45 to 90 degrees |
Rod Pull Lenght: | 3.05 m or 6.09 m | 10 ft or 20 ft |
Rod Holder | Metric | U.S. System |
Maximum Rod Size (HWT) | 114.3 mm | 4.5 in |
Maximum Inside Diameter: | 210 mm | 8.3 in |
Holding Force: | 178 kN | 40015 lb |
Type: | Hydraulically open, gas presure close | |
Wireline Hoist | Metric | U.S. System |
Drum Capacity (4.76mm – 3/16” wire) | 1800 m | 5905 ft |
Line pull min. (full drum) | 3.0 kN | 674 lb |
Line pull max. (bare drum) | 11.9 kN | 2675 lb |
Line speed min. (bare drum) | 115 m/min | 377 ft/min |
Line speed max. (full drum) | 455 m/min | 1492 ft/min |
Main Winch | Metric | U.S. System |
Single line capacity: (bare drum) | 80 kN | 18000 lb |
Line speed:(bare drum) | 43 m/min | 141 ft/min |
Cable size: | 16 mm | 10/16 in |
Cable lenght: | 35 m | 114 ft |
Mud Pump | ||
TP135H | Metric | U.S. System |
Flow: | 135 l/min | 35 gal./min |
Pressure: | 70 bar | 1000 psi |
Corporate Video
