Underground - Surface
*Operating Efficiency
*Safe and fast rod handling
*Drill in any direction.
*Automatic synchronisation, hydraulic rod making and breaking.
*Lower Maintenance Costs
*Less Energy and Fuel Consumption
*Reliability, Durability and Safety!
*Compact and Innovative Design
SMART CHOICE!
The Levent 4004 is an all-hydraulic diamond core drill rig with a wide range of options and accessories.It consists of three main parts: the drill unit a power unit and a control console. As an option the drill unit can be mounted on carriers for special purposes like a; a narrow crawler for underground use, or a wide crawler for surface use. It is suitable for a variety of drilling methods in both underground and surface operations such as core drilling, grouthole drilling, probing etc..
The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electrical power unit, as an optional diesel engine for tramming is available. The Levent 4004 uses the best technology available for diamond core drills. All tube jointing, thread breaking, feeding, wireline, hoist sequences are controlled from a control console which can be positioned to suit the setup.
Feeding is done by a direct cylinder, thereby eliminating chains in the feed system. The drill can be equipped with two different feed lenghts,and two different sizes of rotation units to suit rod size and drilling applications.
To achieve the best results with regard to:
-high penetration
-optimal core recovery
-and low drilling costs
It is of primary importance that drill rods,core barrels and coring bits are of the right type and quality,matched to the rock drill and to the prevailing rock conditions.
Bearing in mind core drill’s speed of rotation,its rating and chuck diameter, the Levent 4004 is best suited to drill holes 60-96 mm in diameter (B-H) using both conventional as well as wire line rods.
The spindle inner diameter is 101.6 mm (4 in) in the H-size rotation unit.
Levent4004 is Core drilling rig for surface and underground operations; For wireline B–H and conventional core barrels.
*Two Configurations; skid mounted or crawler mounted for mobility.
*Electrical or Diesel Power Unit.
*Easy and fast to set-up for drilling.
*Easy positioning with Hydraulic worm gear. (Optional)
*All tube jointing, thread breaking, feeding, wireline sequences can perform all drilling and rod handling operations from the control panel.
Drilling Depth Capacity
These figures serve as guidelines only. They are calculated with available pull/feed force, weight of drill string in water filled hole, average WOB and reserve for breaking solid core in rock with 5MPa Tensile Strength. Son-Mak cannot guarantee these capacities will be reached in all working conditions due to varying factors such ITH used, conditions of the ground and differences in operation
Vertical Down | Vertical Up | |||
Drill Rod | Metric | U.S. System | Metric | U.S. System |
BO / BRO Wireline | 2380 m | 7808 ft | 1500 m | 4921 ft |
NO / NRO Wireline | 1550 m | 5085 ft | 1000 m | 3280 ft |
NRO Thin Wall | 1740 m | 5708 ft | 1150 m | 3772 ft |
HO / HRO Wireline | 1000 m | 3280 ft | 580 m | 1902 ft |
HRO Thin Wall | 1150 m | 3772 ft | 640 m | 2099 ft |
Rotation Unit | |
Rod sizes: | B-H |
Power: | Hydraulic Motor |
Max. Torque: | 2425 Nm (1789 ft lbf) |
Max. Rotation Speed: | 1400 rpm |
Type: | Hydraulic Closed, Spring Open |
Spindle Inner Diameter: | 101.6 mm (4 in) |
Chuck axial holding force: | 150 kN (33721 lb) |
System Power Unit | ||
Electrical Power Unit PU110E | Metric | U.S. System |
Power: | 110 kW | 148 hp |
RPM: | 1450 | 1450 |
Primary Pump: | 200 l/min – 315 bar | 52.8 gal/min – 4569 psi |
Secondary Pump: | 65 l/min – 240 bar | 17.2 gal/min – 3481 psi |
Auxiliary Pump: | 65 l/min – 240 bar | 17.2 gal/min – 3481 psi |
Oil Tank: | 130 liters | 34.4 gallons |
Hydraulic Oil Cooling: | Water and Air Oil Cooler | |
System Power Unit | ||
Diesel Power Unit PU150D | Metric | U.S. System |
Volume: | 6.7 liter | 1.77 gallons |
Power: | 164 kW | 220 bhp |
RPM: | 1800 | 1800 |
Electrical System: | 12V | 12V |
Cooling System: | Water | |
Emmissions Certifications: | Stage III | Tier 3 |
Engine Type: | Turbo Charged, After Cooled Diesel Engine. | |
Primary Pump: | 250 l/min – 315 bar | 66 gal/min – 4569 psi |
Secondary Pump: | 80 l/min – 240 bar | 21 gal/min – 3481 psi |
Auxiliary Pump: | 80 l/min – 240 bar | 21 gal/min – 3481 psi |
Oil Tank: | 130 liters | 34.4 gallons |
Hydraulic Oil Cooling: | Water and Air Oil Cooler | |
Feed Frame Alternatives | 1800 | |
Metric | U.S. System | |
Feed Stroke: | 1800 mm | 71 in |
Thrust Force: | 130 kN | 29225 lbf |
Pull Force: | 130 kN | 29225 lbf |
Max. Feed Speed: | 0.9 m/s | 2.7 fps |
Drilling Angle: | 45 to 90 degrees | |
Rod Holder | Metric | U.S. System |
Maximum Rod Size (HWT) | 114,3 mm | 4.5 in |
Maximum Inside Diameter (w/oJaws): | 125 mm | 4.9 in |
Holding Force: | 130 kN | 29225 lbf |
Holding Force with TC Inserts: | 133 kN | 29900 lbf |
Type: | Hydraulically open, gas pressure close | |
Wireline Hoist | Metric | U.S. System |
Drum Capacity (4.76mm – 3/16” wire) | 2000 m | 6561 ft |
Line pull min. (full drum) | 3.5 kN | 786 lb |
Line pull max. (bare drum) | 11 kN | 2472 lb |
Line speed min. (bare drum) | 85 m/min | 278 ft/min |
Line speed max. (full drum) | 245 m/min | 803 ft/min |
Level wind angle: | Adjustable | |
***There is an automatic winding system to prevent the rope from making straight or mixed winding. | ||
Mud Pump | ||
TP135H | Metric | U.S. System |
Flow: | 135 l/min | 35 gal./min |
Pressure: | 70 bar | 1000 psi |
Corporate Video
